PPWR and Packaging Compliance: What the New EU Regulation Means for Industrial Packaging

The European Union’s Packaging and Packaging Waste Regulation (PPWR) is changing the way packaging is designed, manufactured, documented and placed on the European market. For industrial packaging manufacturers, the regulation places greater emphasis on packaging minimisation, material composition, recyclability, reuse and documented conformity.

At Clip-Lok SimPak, we have taken a proactive approach to these requirements. On 12 August 2026, Clip-Lok SimPak (Scandinavia) ApS issued its first EU Declaration of Conformity for its fibre-based and wooden packaging solutions, covering the applicable requirements of Regulation (EU) 2025/40.

What is the PPWR?

The EU Packaging and Packaging Waste Regulation – Regulation (EU) 2025/40 replaces the previous Packaging and Packaging Waste Directive and establishesrequirements covering the entire life cycle of packaging.
The regulation applies to packaging placed on the EU market, regardless of the material used, and aims to reduce packaging waste, improve recyclability and increase reuse while harmonising requirements across EU Member States.

ppwr-2025
The PPWR introduces requirements relating to:
  • Packaging minimisation – packaging should use the minimum weight and volume necessary to perform its function.
  • Recyclability – packaging must be designed with its end-of-life and recycling in mind.
  • Reuse and repair – reusable packaging and systems for reuse are encouraged.
  • Restrictions on substances of concern – including requirements concerning certain substances and PFAS.
  • Material and waste management information – supporting appropriate sorting, recycling and recovery.
  • Conformity assessment and documentation – manufacturers must be able to demonstrate that applicable requirements have been met.
The Regulation became applicable on 12 August 2026, following its entry into force in February 2025.

From one-way packaging to a more circular approach

One of the key principles behind the PPWR is the move away from unnecessary packaging waste and towards a more circular packaging economy.
For industrial supply chains, this makes the design and intended lifetime of packaging increasingly important.
A transport box should not only protect the product during one shipment. Where the application allows it, packaging can be designed to be returned, reused, repaired and ultimately recycled.
This approach is already central to Clip-Lok SimPak’s packaging solutions. Our wooden packaging can be designed for returnable and reusable packaging systems, while individual packaging configurations can also be repaired using approved replacement materials and components, subject to inspection and fitness-for-purpose requirements.

Designing packaging around its function

The PPWR requires manufacturers and importers to consider whether packaging uses more material, weight or volume than necessary to fulfil its function.
This does not mean simply making a box lighter.
Industrial packaging must still provide the necessary protection, mechanical strength, stability and functionality required throughout the supply chain. The Regulation specifically recognises product protection as one of the performance criteria for packaging minimisation.
At Clip-Lok SimPak, packaging is therefore developed around the product, handling requirements and logistics flow. The objective is to find the right balance between protection, durability, material use, transport efficiency and reuse.

Our approach to PPWR compliance

Our EU Declaration of Conformity covers Clip-Lok wooden packaging solutions, including:

  • plywood boxes, including film-laminated and stained or painted surfaces;
  • OSB packaging;
  • wood-based packaging components;
  • packaging and dunnage components made from materials such as steel, PE foam, HDPE, PUR and wood-based materials;
  • plastic and/or steel clips and other applicable metal fastening components.

The exact material composition of an individual packaging unit is determined by its product specification, order documentation and/or technical documentation.
This is important because PPWR compliance is not simply a statement about a packaging material in isolation. The specific materials and components used in an individual packaging configuration determine the applicable assessment and supporting evidence.

From materials to end-of-life

The Clip-Lok SimPak declaration also addresses the packaging’s end-of-life considerations.
Where applicable, packaging is designed so that its principal material fractions can be identified and directed towards appropriate recycling or recovery routes. Wood-based components may be recycled or recovered for energy in accordance with applicable requirements, while metal components can enter appropriate metal recycling streams and suitable plastic components can be recycled where collection and recycling routes exist.
For reusable packaging, the approach goes one step further: packaging can remain in service through multiple uses, provided it is inspected and remainssuitable, intact and fit for purpose.

Compliance is also about documentation

An important change introduced by the PPWR is the stronger focus on demonstrating conformity.
Under Article 15, manufacturers must carry out the applicable conformity assessment, prepare technical documentation and, where conformity has been demonstrated, draw up an EU Declaration of Conformity. For reusable packaging, the Regulation requires the declaration and technical documentation to be retained for 10 years from the date the packaging is placed on the market; for single-use packaging, the period is five years.
Clip-Lok SimPak’s declaration is supported by technical documentation that can include, as applicable, product identification, material composition, supplier declarations, substance assessments, recyclability and end-of-life assessments and relevant analytical test results.
The declaration also references relevant requirements and specifications, including REACH, ISPM 15, EUDR, EN 13430 and EN 13431, where applicable to the packaging configuration.

What this means for our customers

For companies purchasing industrial packaging for European supply chains, PPWR means that packaging decisions increasingly need to consider more than product protection and purchase price.
Important questions include:

  • Is the packaging optimised for its intended function?
  • Can it be reused or repaired?
  • What materials and substances does it contain?
  • Can its principal materials be separated and directed towards appropriate end-of-life routes?
  • Can the manufacturer demonstrate conformity with the applicable requirements?

At Clip-Lok SimPak, we believe these considerations should be incorporated into packaging design from the beginning — not added after the packaging has already been developed.

Preparing for the future of industrial packaging

The PPWR establishes a more harmonised framework for packaging across Europe, but implementation will continue to develop through additional standards, implementing acts and technical requirements.
For packaging manufacturers and users alike, this makes early preparation important.
Clip-Lok SimPak’s EU Declaration of Conformity represents one step in that process. By combining customised packaging design, reusable solutions, material assessment and technical documentation, we are working to ensure that our packaging solutions are prepared for the evolving requirements of the European packaging market

Looking for packaging designed with reuse, durability and PPWR requirements in mind? Contact Clip-Lok SimPak to discuss your next packaging solution.